I'm trying the latest Kaffeine 2 (2.0.3), built using the instructions at Linuxtv/Kaffeine, but I'm having no luck scanning in channels using either a TBS6220 DVB-T/T2 or TBS6983 pci cards.
I have excellent signal strength and quality on each satellite or terrestrial channels I can receive, w_scan confirms this.
However, I have SNR of 0% when scanning through a satellite with Kaffeine. Signal display shows 85%, (ignorable, as it shows the same % with no cable connected).
I'm using a Universal LNB, no DiSEqC Switch.
Log output from Kaffeine 2.0 -
28-09-16 10:19:13.254 "Using libVLC with --no-video-title-show"
28-09-16 10:19:13.290 DvbManager::loadDeviceManager: using built-in dvb device manager
28-09-16 10:19:13.410 DvbLinuxDevice::startDevice: found dvb device "P1131716062200002" / "TurboSight TBS 62x0 DVBT/T2 frontend"
28-09-16 10:19:13.412 DvbLinuxDevice::startDevice: found dvb device "P1131716069830001" / "TurboSight TBS 6983 DVBS/S2 frontend"
28-09-16 10:19:13.412 DvbLinuxDevice::startDevice: found dvb device "P1131716069830001" / "TurboSight TBS 6983 DVBS/S2 frontend"
28-09-16 10:19:41.287 QObject::connect: No such slot DvbSLnbConfigObject::reject()
28-09-16 10:19:57.775 DvbRecordingModel::findNewRecordings executed.
28-09-16 10:19:57.775 DvbRecordingModel::removeDuplicates executed.
28-09-16 10:20:14.872 DvbLinuxDevice::setVoltage: ioctl FE_SET_VOLTAGE failed for frontend "/dev/dvb/adapter1/frontend0"
28-09-16 10:20:15.136 tune to: "S 964250 H 22000000 5/6"
28-09-16 10:20:15.136 DvbLinuxDevice::libdvbv5 ERROR Need a LNBf to work
28-09-16 10:20:16.678 DvbDevice::frontendEvent: tuning failed for freq= 964.25 MHz
28-09-16 10:20:16.679 DvbLinuxDevice::setVoltage: ioctl FE_SET_VOLTAGE failed for frontend "/dev/dvb/adapter1/frontend0"
28-09-16 10:20:16.943 tune to: "S 979000 V 22000000 5/6"
28-09-16 10:20:16.944 DvbLinuxDevice::libdvbv5 ERROR Need a LNBf to work
28-09-16 10:20:18.479 DvbDevice::frontendEvent: tuning failed for freq= 979 MHz
28-09-16 10:20:18.480 DvbLinuxDevice::setVoltage: ioctl FE_SET_VOLTAGE failed for frontend "/dev/dvb/adapter1/frontend0"
28-09-16 10:20:18.743 tune to: "S 994000 H 22000000 5/6"
28-09-16 10:20:18.743 DvbLinuxDevice::libdvbv5 ERROR Need a LNBf to work
28-09-16 10:20:20.278 DvbDevice::frontendEvent: tuning failed for freq= 994 MHz
The log shows the silly frequencies tuned in from Astra 28.2E (i.e 964250H, which equates to the correct 10714.25H minus the 9750MHz LO frequency (!). What's that all about?
Needless to say nothing is scanned in during the whole pass of the Astra 28.2 muxes.
The problem seems to lie here - No such slot DvbSLnbConfigObject::reject() - and
DvbLinuxDevice::setVoltage: ioctl FE_SET_VOLTAGE failed for frontend "/dev/dvb/adapter1/frontend0".
Adapter 1 is the TBS6983 tuner I'm using. Any ideas please?
OS is Linux Mint 18
kernel 4.4.0-21 generic
Regards Llew
Category: Computer and USB Satellite Receivers and Recording