I have decided after reading 7 years of forum information about smartDVB to give it a try on a new TBS-6902 satellite card. I was able to fumble my way through the install and scan in C-Band channels on Galaxy 19 at 97W. I am using a DSR-922 to position the dish and slaving the 6902 off of another receiver so I would not need any switching or positioning on the first go-around. I tried some channels and they worked, but I received "Error adding Decode file" on the Azteca channels. After some review and searching I found that the LAVfilters needed to be installed if you are running Win 10. This fixed me up and I was able to receive Azteca and the CBS feeds without problems after using the LAVfilters for decoding. Now my question is, what other programs/applications/drivers/filters etc do I need to download and install to have a complete installation when using smartDVB?
Thanks,
Jim
Thanks,
Jim
Category: Computer and USB Satellite Receivers and Recording