Hello. I am reposting this because my problems stopped for awhile and everything was fine with my 6903, but now it has gone back to it's original problems. Main problem. using any blindscan from TBS's own to CrazyCat, EBSPro, SmartDvb and DVBDream it will only scan one polarity and double up the transponders example 3820 will come in twice once as vertical and once as horizontal. I will not Horizontal even if I tell it to, still scans vertical and calls them horizontal. Also tuners are pretty much deaf. A signal booming on any of my other 4 recievers will not lock on the 6903. I bought this card back in Feb of 2017 when Rick did not have them from Amazon via UTA shops. They are giving mw a run around with it. Did a teamviewer session a couple of weeks ago with them and a manual tune with a booming transponder like the muxes on 101 c-band would tune. Took him to a nascar feed on 101 and both my Micro HD and my FreesatV8 were locked with 94 signal and 84 quality. He quickly changed to lets check your blindscan. So he ran TBS blindscan and it only scanned vertical transponders. At that point he said he had to go. Now they want to do another team viewer session and check again. What would you do? My equipment is a 12 foot unimesh dialed in, a modded WNC 4x8 multiswitch and a pair of brand new Norsat 5150 on a ortho feed. And before you ask, I have switched cables with the working recievers and tried both tuners on the 6903. Computer is a AMD running stock at 3.8 with 16 gigs of 2133 memory and a GTX 1060 video card running Win 10 64. Same results running Win 7 64 bit.
Category: Computer and USB Satellite Receivers and Recording